3000 kN Compression Testing Machine Amsler Type 300 D75

For the determination of the compressive strength of concrete cubes 15 or 20 cm, or cylinders Ø 15 x 30 cm, according EN 12390-3

1000 kN Long-Term Creep Testing Machine Type HKB-1000

The HKB long-term creep testing machines are used to perform creep tests on cement based materials. Tests can be carried out either on a single specimen or specimens placed in series. If it is necessary to subtract the shrinkage deformation, another stress-free specimen is used to measure the shrinkage.

500 kN Compression Testing Machine MFL Type BPS 50

For the determination of the compressive strength of cement and mortar prisms according to EN 196-1 and concrete cubes and cylinders

10 kN Bending Testing Machine Typ B10

For standard bending tests of cement and mortar prisms according to EN 196-1, Plaster wall bonding prisms

Cement Testing Machine Type B10-100 + D-200-D

For the determination of the compressive & flexural strength of cement prisms 4 x 4 x 16 cm
EN 196-1, EN 413-2, EN 495-2

500 kN super rigid, servo-hydraulic compression testing machine (completely revised)

For testing of rock or HP concrete cylinder drill cores in connection with new control cabinet, which includes in the lower part a low-noise hydraulic power pack and in the upper part the ultra-high speed-digital measuring and control system PCS8000.

Compression / bending testing machine Typ DB156

For standard-compliant compression and bending testing of cement and mortar prisms 4 x 4 x 16 cm according to EN 196-1, EN 413-2, EN 495-2 etc.

200 kN Servohydraulic Testing Machine with Hydraulic Used and Digital Controler Type LF-200-S

• Hydraulic Power Pack PAC-10 (10l/min. with 280 bar)
• Digital controller PCS8000 with Test Software for Static Material Tests
• Protection Device

Samples measuring and weighing system with density determination Type MS-200 / MSAD-30

For determining the sample dimensions of concrete cubes 15 and 20 cm, as well as weight and bulk density

200 kN servohydraulic cement compression testing machine Type D-200

This machine is designed to carry out standard-compliant compressive strength tests on cement and mortar specimens half's 4 x 4 x 16 cm according to EN 196-1 or with related compression device on mortar cubes 2-inch or 50 mm according to ASTM C109.

400 kN Long-Term Creep Testing Machine Type HKB-400

The HKB long-term creep testing machines are used to perform creep tests on cement based materials. Tests can be carried out either on a single specimen or specimens placed in series. If it is necessary to subtract the shrinkage deformation, another stress-free specimen is used to measure the shrinkage.

2000 kN Compression Testing Machine Amsler Type 200 D79

For determining the compressive strength of concrete, stone, wood and other building materials. Due to its sturdy construction, accuracy and easy operation, the machine is equally suitable for laboratory testing, as well as for series and production testing on building sites.