Side-Loading Hydraulic Non-Shift Wedge Grips Series WGR-H up to 2500 kN

This fatigue rated, parallel closing grips are well suited for static, quasi-static, fatigue (through-zero), LCF to HCF testing.

Hydraulic Collet Grips for Fatigue Testing of Round Specimens Series HCG

The HCG Hydraulic Collet Grips are the best solution for fatigue testing of round smooth shank specimen. They are well suited for any kind of fatigue testing including LCF, TMF, force controlled constant amplitude axial fatigue test according to ASTM E446, ISO 1099 or EN 6072 and constant amplitude strain controlled axial fatigue tests according to ISO 12106, BS 7270 and others.

Hydraulic Parallel Closing, Dual-Side Grips Series SPG up to 3000 kN

This open-front constructed parallel grips with two side hydraulic clamping pistons deliver proven gripping performance on a wide range of materials including steel plate, stell rods, machined specimens including rounds and flats, reinforced steel bars, 7-wire strands and others.

Hydraulic Wedge Grips Series WG-H up to 3000 kN

This rigid, general-purpose hydraulic wedge grips provide productive tensile testing and quick and easy interchanging between different inserts (jaw faces).

Mechanical Wedge Grips Series WG-M up to 250 kN

This symmetrically closing general purpose mechanical wedge grips provide productive tensile testing and quick and easy interchanging between different inserts (jaw faces).

Side Loading, Self-Tightening Manual Wedge Action Grips Series 1341

The family of manual wedge action grips 1341 are general-purpose grips designed for easy specimen loading, alignment, and productive testing of metals, composites, plastics, polymers, elastomers, wood, cardboard, and others including high strength materials.

Side Loading, Self-Tightening Manual Wedge Action Grips Series PWG up to 400 kN

The family of manual wedge action grips PWG are general-purpose grips designed for easy specimen loading, alignment, and productive testing of metals, composites, plastics, polymers, elastomers, wood, cardboard, and others including high strength materials.

Wedge Screw Grips Series KSP up to 250 kN

These manual operated wedge screw grips are well suited for tensile tests on metals, hard and reinforced plastics, (geo)-textiles, wood and other similar materials. The KSP series of manual operated mechanic grips combines the advantages of screw grip and wedge grip functions.
They are operated via hand-wheel(s) and available with or without synchronization. The opening & closing (parallel) and holding force to the specimen is applied via hand-wheel(s) whereas the main gripping force is generated by the wedge action proportionally increasing to the applied tensile force.

Self-Tightening Wedge Grips Series 243 up to 50 kN

The 243 series of multipurpose self-tightening wedge grips are available for 20 and 50 kN tensile loads.

Hydraulic Wedge Grips for the use in Environmental Chambers Series WG-AT 100 or 250 kN

These grips are designed to be used over a wide range of temperatures inside an environmental chamber and are available for tensile forces of 100 kN or 250 kN.

1100°C High Temperature Hydraulic LCF Grips Series HTG

The HTG grips are the ideal choice for conducting high-temperature Low Cycle Fatigue (LCF) Tests in combination with high temperature furnace.
These grips with hydraulic specimen preload are specially designed for Low-Cycle Fatigue Testing or for any other reverse axial stress application up to 15 Hz or tension-only application.

1500°C High Temperature Bend Test Fixture with Deflection Measuring System Series PMA-06

The PMA-06 water cooled fixture is used for exact deflection and strain measurement during flexural and compression tests of Ceramics and Ceramic Based Materials.

High Temperature Tensile Grips for Flat Specimens Series PMA-31

These form-fitted high-temperature tensile grips are designed to test flat specimens without PIN holes.
The grips are easy to operate and used in combination with high-temperature load strings extending into the furnace.

Self-Aligning Threaded-End Specimen Grips Series 179

The family of manual wedge action grips PWG-300 are general-purpose grips designed for easy specimen loading, alignment, and productive testing of metals, composites, plastics, polymers, elastomers, wood, cardboard and others including high strength materials.

Mechanical Tension-Compression Grips Series TF

The TF grips are cost-effective fatigue rated, mechanical grips suitable for tension, compression and alternating tension-compression load on specimen with threaded ends or button-heads.

Fracture Mechanics Clevis Grips

The range of Mechanical Clevis Grips are designed for static and fatigue fracture testing of Compact Tension (CT), Disk Compact Tension (DCT, Arc Tension (AT, WOL, Centre-Cracked or Edge-Cracked specimens.
Available are Compact Tension Fixtures designed in accordance with ASTM E399, E1290, E647 & E1820.

Self-Tightening Eccentric Roller Tensile Grips Series 7

The self-tightening roller grips are easy & quick to operate grips for tensile testing of rubber, flexible polymers and plastics, elastomers, thin sheets, films, bio-textiles and other flexible materials exhibiting a large reduction in cross-section area during testing.

Webbing Sheet Ribbon Roller Tensile Grips Series 222

These self-clamping action webbing capstan grips are used for tensile testing of soft and flexible specimens as strips, straps, ribbons, seat belts, slings, and webbing.

Pneumatic Cord and Yarn Tensile Grips Series 13

These pneumatic operated tensile grips are designed for tensile tests on fibres, fine wires, cords, filaments, yarns and other sensitive specimens. The Capstan design provides reduced problems with jaw breaks associated with testing of this sensitive specimens.

Fully Articulated Ceramic Flexural Strength Test Fixture according to ASTM C1161 Series 238-5P-B200

ASTM C1161 describes the determination of the flexural strength of advanced ceramics materials. Rectangular specimens are tested either in four-point or three-point configuration at ambient temperatures.

Fully Articulated Guided Ceramic Flexural Strength Test Fixture to ASTM C1161 Series WTF-CF-100

This fixture fully comply with ASTM C1161 configuration B.
ASTM C1161 describes the determination of the flexural strength of advanced ceramics materials. Rectangular specimens are tested either in four-point or three-point configuration at ambient temperatures.

Static Puncture Strength Test Fixture for Geotextiles according to ASTM D4833 or ASTM D6241

Static Puncture Strength Test Fixture for Geotextiles according to ASTM D4833 or ASTM D6241

600 kN Webbing Sling Tensile Grips Series CG600

These clevis tensile grip is designed to test round slings according to EN 1492-2 and other international standards with widths up to 160 mm and maximum tensile forces up to 600 kN.

Concrete Testing Devices

Cement and Mortar Testing Devices